Free download

    How to Use VCDS Lite 1.2 Full Registered Activated for VW/Audi/Seat/Skoda

    How to Use VCDS Lite 1.2 Full Registered Activated for VW/Audi/Seat/Skoda

    VCDS Lite 1.2 is a Windows-based diagnostic tool for Volkswagen, Audi, Seat and Skoda vehicles that do not require a dongle interface. It allows you to scan all the controllers for fault codes, read and clear diagnostic trouble codes, view live data, perform basic settings and adaptations, and more. In this article, we will show you how to download, install and use VCDS Lite 1.2 full registered activated version for free.

    What is VCDS Lite 1.2 Full Registered Activated?

    VCDS Lite 1.2 full registered activated is a modified version of the original VCDS Lite software that has been cracked and activated to work with any simple K-Line/KL line/KKL-Line/VAG-COM 311/VAG-COM 409 interface that supports the ISO 9141-2 protocol[^1^]. This means that you do not need to buy an expensive original Ross-Tech interface or register the software online to use it. You can simply download the software from the link below and use it with any compatible interface.

    How to Download VCDS Lite 1.2 Full Registered Activated?

    To download VCDS Lite 1.2 full registered activated, you need to follow these steps:

    1. Click on this link: https://www.mediafire.com/?u4sxcv9zp3fq3r6 [^3^]
    2. Enter the password: obdstart2015 [^3^]
    3. Extract the rar file using WinRAR or any other software that can open rar files.
    4. You will get two files: VCDS lite v.1.2 (Registered & Activated) FULL.exe and _readme.txt.
    5. Read the _readme.txt file for instructions on how to install and use the software.

    How to Install VCDS Lite 1.2 Full Registered Activated?


    How to Download VCDS Lite 1.2 Full Registered Activated?

    To install VCDS Lite 1.2 full registered activated, you need to follow these steps:

    1. Run the VCDS lite v.1.2 (Registered & Activated) FULL.exe file as administrator.
    2. Follow the installation wizard and accept the license agreement.
    3. Select the destination folder where you want to install the software.
    4. Click on Install and wait for the installation to complete.
    5. Click on Finish and launch the software from the desktop shortcut or the Start menu.

    How to Use VCDS Lite 1.2 Full Registered Activated?

    To use VCDS Lite 1.2 full registered activated, you need to follow these steps:

    1. Connect your interface cable to your computer’s USB port and to your car’s OBD-II port.
    2. Turn on the ignition of your car but do not start the engine.
    3. Open the VCDS Lite software and select your interface type from the Options menu.
    4. Click on Test to check if your interface is working properly.
    5. If you see OK next to Port Status and Interface Found, then your interface is ready to use.
    6. If you see any errors or warnings, then check your cable connection, driver installation, or interface compatibility.
    7. Click on Save to save your settings and close the Options menu.
    8. Click on Select Control Module from the main menu to choose which controller you want to diagnose.
    9. Select a controller from the list and click on Open Controller.
    10. You will see various tabs such as Fault Codes, Measuring Blocks, Output Tests, Basic Settings, Adaptation, Coding, etc.
    11. Select a tab according to what you want to do with your controller.
    12. Follow the instructions on the screen or refer to the online manual for more details on how to use each function.

    Conclusion

    VCDS

    Hi, I’m Adam Smith

    Leave a Reply

    Your email address will not be published. Required fields are marked *